V-Belt Installation Way
Views : 4979
Update time : 2020-12-21 16:11:19
Before installation, if the center distance between the two shafts is adjustable, the center distance should be shortened first, and then the center distance should be adjusted as required after the tape is installed; if the center distance between the two shafts is not adjustable, you can use the V-Belt, Put it into the groove of the wheel first, then turn the other pulley to install the triangle tape, and install all the triangle tapes in the same way. ,
It is forbidden to pry or pull the V-Belt with tools during installation to prevent the V-Belt from being stretched or too tight. To prevent the installation of belt pulleys in series, the centers of the two upper pulleys must be aligned, otherwise it will cause the triangular tape to work on one side, severe wear and reduce the service life of the triangular tape.
